AIQURA INFRARED FOREHEAD THERMOMETER | AD801

Scope of application

Used by families and medical departments when measuring body temperature.

Product features

• Strong environmental temperature adaptability, which can still be used normally in complex environment
• New control probe structure to ensure more accurate measurement
• Two measurement modes of body temperature and object temperature, one button mode switching operation is convenient and practical
• Fever alarm prompt, backlight color prompt
• Automatically save 16 sets of temperature measurement values
• Large size LCD screen, high brightness three color backlight, clear and soft display
• Two temperature units of Celsius and Fahrenheit can be selected
• Automatic shutdown saves power and energy
• Simple and clear operation mode.

Precautions

Please read this manual carefully before use, and make sure the battery is installed It is forbidden to immerse the forehead temperature gun in any liquid, and it is forbidden to use it in an excessively high or low temperature environment for a long time. It is forbidden to collide, fall, mix with sharp objects, and dismantle by yourself Do not use in strong electromagnetic interference environment Put the forehead temperature gun out of the reach of children. The measurement results can’t replace the doctor’s diagnosis.

This product measures the body temperature by collecting the infrared thermal radiation from the human forehead and hair. Its operation is simple and sanitary, and its measurement is fast and accurate. The user only needs to point the detector head at the forehead and press the measurement key. In one second, the user can quickly and accurately measure the body temperature, which can be used by families and medical departments to measure the body temperature.

This product is a class II medical device, belonging to the internal power supply equipment, type B application part, and the protection grade is common equipment (IP20).It can not be used under the mixture of flammable anesthetic gas, nitrous oxide and other gases, and it is a continuous operation equipment. The EU is classified as IIB.

The product is mainly composed of infrared temperature sensor, signal receiving processor, key, buzzer, LCD display, battery, etc.

Installation and use instructions

1. Infrared detector

2. LCD

3. Button down

4. Button up

5. Set button

6. Switch

7. Battery cover

Safety instructions

Human body temperature measurement

• After the battery is installed, press the power on key for 1 second, and the power on is completed after the full display self check.
• Confirm that the measurement mode above the screen is body temperature mode (non object temperature mode)
• Align the forehead temperature gun probe with the middle of the forehead and keep it vertical, with a distance of about 3-5cm. Press the measurement key to start the measurement. After about 1 second, the screen displays the measurement value. Press the measurement key for 5 seconds to shut down when no measurement is made, or shut down automatically after 30 seconds.

Warm Tips:

1.Before and after use, please keep the sensor and probe cavity clean.

2.Please place the forehead temperature gun in a temperature stable environment for use. When ambient temperature changes greatly (e.g. from indoor to outdoor), please place for about thirty minutes after measurement.

3.Do not begin to measure body temperature immediately after measuring the temperature of an object at very high or very low temperature. Please place it for ten minutes.

4.When the measurement object comes from a place that is quite different from the measured ambient temperature, it should stay in the test